injection mould|over mould|household appliances mould|HongChao Mold,INC.

Categories

CONTACT US

Hongchao(Dongguan)Mold & Technology Co.,Ltd.
Mobile:18925597988
Tel:86 0769-82621066
Fax:86 0769-82621099
Website: http://www.injection-mould-cn.com
E-mail:sales@injection-mould-cn.com
Address:tangxia Town,Dongguan City,Lincun,New 16

Current Location:Home -->PRODUCTS -->over mould


over mould for shredder products

In the applications of over mould, proper support of the plastic insert is required. Without support, the plastic substrate can deform due to the TPE injection pressure. In extreme cases, the insert will break or the TPE melt will impinge through the plastic insert. Flashing in certain areas of the tool can also result from displacement of the insert within the mold cavity. This type of mould design is usually not an issue with two-shot molding because the first shot is automatically supported on the “B-half ” of the tool.

Mold Specification:
1. Mould material: NAK80,P20,2738,718,718H, etc(custom); mould base: #45.LKM, HASCO DME (custom)
2. Process ways:Injection molding, Insert molding, Over molding.
3. Runner system Hot/Cold runner, Submarine gate, Sprue gate, Pin point gate(custom).
4. Injection Machine Type;  80T, 90T, 120T.
5. Product Material: PC, TPU, PA66+GF30%, PA66, PMMA, etc
6. Mould life: 500,000 shots to 1000,000 shots
7. Cavity:single/multi cavitiy
8. Design software: Choose UG for 3D design, AutoCAD for 2D drawing, mould flow for runner analyze 
9. Usual Delivery time: 30days and depending to the complexity of moulds structure
10. Usual Injection cycle time: 35 Seconds 
11. FOB Shenzhen in wooden box;
12. Payment: T/T, 30% Deposit with PO released.

Company advantages:
H.C mould is a professional manufacturer of all kinds of injection mould, we provide moulds in various types such as electronics mould, home appliance mould, automotive mould, medical equipment mould, power tool mould, etc. We can supply either the mould or the final plastic products base on customer's requirement.
We do detail front-end analysis for every new project, to make sure the project will be finished according to customer quality requirement in time, to lay firm foundations for new project’s smooth going. According to customer 2D/3D drawing, our mould analysts early predict the possible problems and prepare precautions accordingly, so plastic moulding time and cost can be saved a lot for customer.

【Clicks:】 【Joined:2013-06-04】 【Close this page

Address: Tangxia Town, Dongguan city, the 16th, new Sun City Tel: 0769-85337367 fax: 0769-85337367

Copyright © 2006-2011HongChao Mold Steel,INC E-mail:sales@injection-mould-cn.com