Hongchao(Dongguan)Mold & Technology Co.,Ltd.
Tel:86 0769-82621066
Fax:86 0769-82621099
Address:tangxia Town,Dongguan City,Lincun,New 16

Current Location:Home -->FAQ

causes and solutions for flow marks

If molten plastic does not properly flow as it fills the cavity, flow marks may result. This can often be fixed by changing molding parameters or adjusting the mold by changing the gate location or size. Usually the gate should be reposition to a thick section and relocate the gate to balance the flow or reducting the runner diameter.
【Clicks:】 【Joined:2013-04-28】 【Close this page

Address: Tangxia Town, Dongguan city, the 16th, new Sun City Tel: 0769-85337367 fax: 0769-85337367

Copyright © 2006-2011HongChao Mold Steel,INC