Categories

CONTACT US

Hongchao(Dongguan)Mold & Technology Co.,Ltd.
Mobile:18925597988
Tel:86 0769-82621066
Fax:86 0769-82621099
Website: http://www.injection-mould-cn.com
E-mail:sales@injection-mould-cn.com
Address:tangxia Town,Dongguan City,Lincun,New 16

Current Location:Home -->FAQ


causes and solutions for flash

When two halves of a mold come together, the sides of the cavities must press together tight enough that no molten plastic leaks out of the cavity, resulting in a thin layer of plastic protruding from the part called flash. The plastic injection molding press must have enough tonnage, and the mold must be properly built and maintained to avoid this problem. However, some materials flash more easily than others. In fact, most thermoset materials will flash regardless of the press and mold. These parts need to be “deflashed” as a secondary operation.
【Clicks:】 【Joined:2013-04-28】 【Close this page

Address: Tangxia Town, Dongguan city, the 16th, new Sun City Tel: 0769-85337367 fax: 0769-85337367

Copyright © 2006-2011HongChao Mold Steel,INC E-mail:sales@injection-mould-cn.com